I was scrolling through Reverb—as one does—and I realized I was seeing an unusually high number of Combo 400s for sale. At any given point I’d expect the number of Combo 400s on Reverb to be somewhere between zero and one. Maybe two every once in a blue moon.
Last week there were seven. Now I’m not going to make any grand statement about what that says about the market writ large—maybe it means something, maybe it’s just a coincidence. But seven is a lot.
The Combo 400 (click to learn more) has always been one of those guitars that I’ve thought would be “nice to have” from a historical standpoint—if the price was right. So with seven on the market I thought I’d take a look and see if I could spot a potential deal.
I didn’t find a deal. But I did find something else—a couple something elses, in fact—and I got excited for a minute. Then disappointed. Let me walk you through the process.
But because the Combo 400 is a somewhat obscure, early model, let me briefly remind you what we’re talking about. This is the Combo 400.

Introduced in 1956, the Combo 400 was Roger Rossmeisl’s (click to learn more) first original design for Rickenbacker, and the brief must have been galling for a classically trained luthier best known for his high-end arch-tops: a simple solidbody that was easy to build and could be sold to a price.
But Rossmeisl was gonna Rossmeisl, so the guitar featured a…unique tulip-shaped design and neck-through (click to learn more) construction. The pickup was an off-the-shelf DeArmond unit—at this point the venerable horseshoe pickup (click to learn more) that dated back to 1931 was the only arrow in Rickenbacker’s quiver.
The body wings were attached to the through-neck first with bolts that ran all the way through the body, then with staples and glue, and finally just glue. The wings were finished; the center neck section was clear-coated maple.
Remember that last point because we’re going to come back to it in a minute.
The Combo 400 came in three colors. We’ve already seen Cloverfield Green above, but there was also Montezuma Brown:

And Jet Black, the forerunner of today’s Jetglo:

Those are the only colors the Combo 400 came in. Well, in 1956 and 1957. There were some weird run-out guitars in 1958, but that’s what those were: weird run-outs.
So you can see why this one caught my attention.

Surely that’s a refin, right? I mean that was my first reaction too. But there are some things about it that you wouldn’t expect to see on a refin that made me look closer.

First of all, if it’s a refin, it’s a really old refin. The finish checking and chipping are exactly what you’d expect to see on a guitar this old.
Second, the center neck section is still natural. You almost never see that on a refin—usually the whole thing gets sprayed, center section included.
Third, that finish is not dissimilar to the Blonde finish that was being used on the Combo 600 and 800 (click to learn more) at the same time.
And finally, there’s the back.
The Combo 400 had a unique “flocked” back—millions of tiny fibers sprayed onto an adhesive base. The purpose? The Combo 400 didn’t have standard strap pins. Instead it featured an inset ring on the back to attach a saxophone hook to. The ring was at more or less the guitar’s center of gravity, and the flocking was added to make the guitar less likely to slip.
Refinished guitars almost never have this flocking because…who even knows how to do that?
And this guitar appears to have a flocked back.

Now we’re going to pick all that apart in just a minute. And spoilers, it’s a refin. But before I did that, I found this guitar in that same batch of seven on Reverb.

So what? It’s just another Cloverfield Green Combo 400. But let’s look a little closer at that “clear-coated maple” neck section.

Does that look like clear-coated maple to you? Me neither. That looks a heck of a lot like Blonde. And before you say “ok, it’s another refin,” it too has a flocked back.

So you can see why this piqued my curiosity, right? Two 1956 Combo 400s with what could be factory Blonde finished components. Had I discovered something heretofore unknown? Research was required.
So we’ll start with the guitar with Blonde wings, because that’s where I started.
I said it looks a lot like the Blonde used on the Combo 600 and 800. Does it really? I think the answer is no.

Complicating matters, there is no definitive version of Blonde to use as a yardstick. The Rickenbacker Blonde finish from this era lives in a continuum from almost white to creamy to almost non-existent. But all versions have one thing in common: they’re translucent. You can see at least some of the wood grain underneath.
If you look at the face shot of this guitar above you may say “I can see the grain!” You can’t. That’s all finish checking. When you zoom in on closer shots, that paint is opaque. And while there are plenty of variations on Rickenbacker Blonde out there, I’ve never seen one that is fully opaque.
And believe me, in chasing this down I tried to find one. And what I found, time and time again, were guitars that look opaque from a distance, but once you get close…they’re all translucent.
This Combo 400 isn’t translucent. So strike one.
Next is the color itself. My first reaction upon seeing this guitar in a vacuum was “hey, that kinda looks like Rickenbacker Blonde.” Ignoring the opacity issue, though, when you put it in context, it really doesn’t. It looks like White that has yellowed over time.
This is reinforced by my very first observation above: this is a very old paint job, probably nitrocellulose, given the yellowing and extreme checking.
And it certainy looks like the uneven and patchy yellowing we’d expect to see on an old finish.

I’m calling that strike two.
Now let’s talk about the flocked back.
Guess what? It’s not flocked.
Probably. Either way, it wasn’t done at the factory. Here’s what the factory flocking pattern looks like.

And here, as a reminder, is what it looks like on our mystery guitar.

That, friends, is not the factory flocking pattern. And upon further inspection, I’m not sure it’s flocking. I think it might be something like felt?
The pictures aren’t the best, but look at this one in particular.

If you look at the “flocking” where it crosses the neck section, it kinda looks like a sheet of fabric that dips down following the contours. Like maybe a sheet of felt that’s been glued to the back.
And what’s more, because the flocking fibers were sprayed on, they followed the contours of the grooves between the neck and the wings, making the seams clearly visible. The back of this guitar? No seams.
Strike three, you’re out.
And even though with three strikes we’re out, there is a fourth strike. And yes, I could have started here, but where would the fun be in that?

Because strike four is immediately disqualifying. The chips and flaking around the edge of this guitar show clear evidence of its likely original Jet Black finish underneath. Yes, I pretty much knew this was a refin as soon as I saw that, but I still had to work the process, you know?
My guess? Somebody bought one of these when they were new and wanted to make it their own. I mean, it’s got a Kauffman Vibrola (click to learn more) nailed to it for Pete’s sake. There was a vision here. And I bet it was striking when it was new. It still caught my eye seventy years later!
So since I had already disproven this one, I wasn’t quite so confident about the painted-neck Combo 400. At the very least, I hadn’t uncovered some larger pattern nobody had ever noticed.
But.
There was one very interesting fact about this guitar that made me think I might still be on to something. It has a factory flocking pattern. Over the painted neck.

So it was worth a closer look. And once again I started with the Blonde. And, unlike the painted-wing guitar, up-close it actually looked Blonde, not yellowed White. And it was closer to the Combo 600 and 800 Blonde, if maybe a little bit “whiter”. So still questionable, but no hard strikes yet.
But was it translucent?

After zooming in on a couple of photos, I convinced myself that yeah, it was. Just barely.
So maybe a thicker coat than found on the Combo 600 and 800? Maybe trying to cover up some flaw or defect?
Nothing one hundred percent conclusive either way yet, although I was still leaning heavily towards a refin. But there was still that damned flocking. I’ve never seen a refin with flocking
So I started looking closely at that. And you know what I realized?
I don’t think it’s flocking at all.

There’s just too much not quite right about it. It’s too bumpy. The seams aren’t filled right. The edges are too uneven. The places it’s scraped off…that’s not how factory flocking wears.
Based solely on the few bad pictures, I think it’s something like bed liner that kinda looks like flocking in photos. From a distance. I could be way off here…but I don’t think I am.
I still wasn’t ready to give it up yet, though. I checked the necks on damn near every Combo 400 listed on the Rickenbacker Register looking for Blonde paint. And yeah, I found some that looked a little weird. But nothing like this guitar.
There was no pattern of Combo 400s with a Blonde neck.
I’m going to call this guitar’s myth busted, too. I think it’s a refin.
Or, you know, I could have looked at this one photo for more than a second.

Overspray all over the side of the fingerboard? That’s totally a refin. And don’t even get me started on the truss rod cover fit. I’m guessing there’s all kinds of nastiness that paint job is covering up.
So. A potentially exciting discovery, completely disproven. Dammit.
Why bother sharing it at all, then? Because it was fun to do the research. Because people ask me how I do the research.
And because sometimes disproving a thing is the point.


Nice detective work, Andy.